• About
  • Blog
  • Writing
Menu

Pilbeam Engineering

Street Address
City, State, Zip
Phone Number
A Little Bit of Everything

Your Custom Text Here

Pilbeam Engineering

  • About
  • Blog
  • Writing

Barn Sale Find: Early 1900s View Camera

May 23, 2018 Adam Pilbeam
IMG_3529.JPG

Meet the Seroco 4x5 View camera. Dating from circa 1902, the Seroco cameras were a brand from Sears and Roebuck, and could b purchased mail-order through their catalog.

This camera is likely a rebadged Conley or Rochester Optical make, with a Wollensak shutter and lens definitely manufactured in Rochester, NY.

IMG_3531.JPG

The camera is very complete: the carrying case and plate holds were both included, and intact - except for the case top. The bellows appears to still be light-tight after all these years and the adjustments are pretty smooth.

The film holders are for holding the 4x5” glass plates, the precursor to modern film. One of the holders still had an unexposed plate inside!

IMG_3558.JPG

I’ve started cleaning the camera up - polishing the metal components and running some leather conditioner over the camera body and bellows. It’s still fairly supple, and opens and closes smoothly. 

The Wollensak shutter is the real interesting piece here though.

IMG_3530.JPG

This shutter uses small pneumatic pistons to alter the time the shutter stays open based on the shutter speed you select. The shutter leaves were gummed up, but now move freely. 

The right hand lever cocks the shutter, while the left hand lever actuated it. The shutter is open in the picture above, exposing the aperture underneath. The aperture is controlled by the slider across the bottom of the shutter. Two pins, tied to the pneumatic pistons, slip into notches in the metal bars within the shutter, and regulate the shutter speed. Aside from the delicate shutter and aperture leaves, the pistons are where the most issues occur: depending on what speed is set, the shutter will possibly stay open or not be accurate to the desired speed. 

The right hand lever cocks the shutter, while the left hand lever actuated it. The shutter is open in the picture above, exposing the aperture underneath. The aperture is controlled by the slider across the bottom of the shutter. Two pins, tied to the pneumatic pistons, slip into notches in the metal bars within the shutter, and regulate the shutter speed. Aside from the delicate shutter and aperture leaves, the pistons are where the most issues occur: depending on what speed is set, the shutter will possibly stay open or not be accurate to the desired speed. 

I’ll probably do a special post about the shutter itself, once I get it working. Polishing the pistons so they glide in and out is the key to keeping the shutter working smoothly and accurately. 

The view through the ground-glass back

The view through the ground-glass back

I’m really excited to have found this treasure, and the price could not be beat! My hope is to get it all working and make some nice photographs with it.

In Antiques, Hobbies Tags cameras, photography, antiques, vintage, film, neat
← Dandelion WineWatch Out! The Seiko 5 SNK 809 Review →

Archive

  • February 2019 4
  • January 2019 1
  • October 2018 1
  • September 2018 1
  • August 2018 1
  • June 2018 2
  • May 2018 3
  • April 2018 4

Instragram

Too bad you need 10,000 followers to get the ‘swipe up to visit this page’ function. Anyways, new blog post on my Maple Syrup activities is up! Link in profile.
Good progress from three taps so far. Going to be cold this weekend, so things will settle down a bit. #maplesyrup #countryliving
Sarah made this beautiful Cherry Kuchen for dessert tonight! I am smitten! #dessert #foodie #foodphotography #homegourmet

Powered by Squarespace